Maximizing the efficiency of production processes

Free consultation: +38(067) 577 13 75

Sea buckthorn processing equipment

For fruit still on branches, look at receiving and branch separation. For loose sea buckthorn, compare winnowing, stem removal and double-deck screening according to the incoming material.

Berry processing machinery

Planning a primary processing line for sea buckthorn

Receiving frozen sea buckthorn on branches

The catalogue branch separator handles frozen or dried berries on branches up to 60 cm long. An inclined conveyor feeds a 500 mm diameter drum, where the shaft paddles detach the berries. The fruit leaves through a discharge chute. The unit is listed at 1,500 kg/h. For line sizing, check the rate from your containers and how the branches will be removed.

Cleaning and grading detached sea buckthorn

When the fruit arrives loose, check the proportions of leaves, individual stems and small berries. A vibrating winnower removes light debris. A mechanical stem separator handles stems left on frozen fruit. On the double-deck screen, you can specify bar spacing for the required grades. A separate double-level grader is also listed for fresh or frozen sea buckthorn.

Primary processing and complete frozen berry sorting

The primary processing line includes a bin tipper, loosening conveyor, incline conveyor and branch separator. The frozen sorting line also covers air cleaning, stem removal, double-deck screening and visual inspection. Describe the condition of the fruit at infeed and the grades and quality required at discharge to identify the modules you need.

What the primary processing line includes

The catalogue describes a primary processing line with a bin tipper, a conveyor with a loosening unit, an inclined conveyor and a branch separator. Compare this configuration with your harvesting and storage method. If your fruit arrives detached from the branches, establish how it is received and which cleaning and grading stages are needed downstream.

Plan where to collect long branches, detached stems and light leaf debris. These streams can originate at different modules. Identify a point where operators can sample the fruit to assess cleaning after each machine is set up.

How to check cleaning before size grading

Sample the fruit after branch separation and again after the air cleaning stage. Record leaves, stems and small berries separately for each sample. When adjusting settings, inspect the waste outlets as well. This shows how much usable fruit is being discharged along with undesirable material.

Running the line in a cold processing area

Record how long a batch will spend between feeding and the next operation and where it can wait if a module stops. Check room for bringing in containers and collecting branches during the shift. Test the feed with a representative batch at the expected temperature and with a typical level of frozen clumps.

Information for specifying a sea buckthorn line

  • How the fruit arrives: on branches or already detached, fresh or frozen.
  • Container dimensions, branch sizes and a sample with typical stems and leaves.
  • Target size grades, collection containers and waste discharge points.
  • Layout of the cold area, container access and peak incoming rate.

Machines for separating, cleaning and grading sea buckthorn

OperationCatalogue equipmentDetails to confirm
Detach sea buckthorn still on branchesFor frozen or dried fruit on branches up to 60 cm. Specify the container and branch discharge.
Remove leaves and lightweight twigsUse an air cleaning trial to check how much sound fruit is carried away with the debris.
Remove individual stemsMechanical separation for frozen fruit. Confirm the appropriate screen sizes on a sample.
Separate sea buckthorn by sizeSpecify screen bar spacing or the required size bands for the grader.
Configure a line for frozen sea buckthornAgree on receiving, branch separation, cleaning, grading and inspection.

Equipment selection questions

Which machine handles sea buckthorn still on branches?

The catalogue includes a branch separator for frozen or dried berries on branches. Provide the branch length and the way the fruit will be loaded. If your batch contains loose berries with individual stems, test a stem separator on that material.

Which machine removes leaves and which removes stems?

A winnower removes light leaves and twigs with air. The catalogue lists mechanical separators for stems left on frozen berries. If both types of debris are present, assess the two operations on a sample.

How can we decide whether to add a grader?

Ask the buyer or production team for size ranges and acceptable undersize levels. If size affects the product specification or the next operation, compare the grade outlets from candidate machines using the same input sample.

How do the primary processing and sorting lines differ?

Primary processing receives berries in containers and detaches them from branches. The frozen sorting line includes additional cleaning, grading and inspection modules for the output fruit.

Discuss your berry processing requirements

Leave your name and phone number. If you have a specification, tell us the berry type, incoming condition, required throughput and the operation you want to carry out.

+38 (067) 577 13 75

Name and phone number are required.