How to select berry sorting and processing equipment
Start with the condition of the fruit and the required output
Fresh raspberries for packing, frozen sea buckthorn on branches and bilberries for further processing call for different sequences of operations. Record the incoming product temperature, container type, size range, proportion of damaged berries and types of foreign material. For a frozen batch, note whether it contains clumps and how long it will spend outside cold storage.
For whole berries, consistent sizing, appearance and portion weight are often priorities. For purée, the priority is to prepare clean material for pulping. If the berries are washed before freezing, plan how to drain surface water and transfer the fruit into the next processing area.
Receiving and feeding the line
Select a bin tipper or feeder to suit the container, loading height and the berry’s tolerance for drops. Match the receiving capacity to the actual arrival pattern of batches. A thick layer makes visual inspection harder and can distribute the load unevenly across a vibrating screen.
If you are upgrading an existing line, measure the height and width of the transfer points, the room required for maintenance and the access needed for cleaning. Decide where to collect foreign material, rejected berries and each saleable size grade before finalising the layout.
Dry cleaning, separation and sizing
An air separator removes light plant debris from the product stream. Consider the proportion of leaves and small twigs, and identify berries that may be similar in weight to the material you want to remove. For sea buckthorn, determine whether the berries are still attached to branches or have already been separated and retain individual stems. The catalogue contains machines for each of those operations.
Vibrating screens and graders divide product into size bands. Specify the size limits, the acceptable proportion of berries outside the target range and the destination of each outlet. Where frozen berries arrive in clumps, agree on a method for separating them before choosing a screen.
Washing, surface water removal and visual inspection
Choose a washer to suit the contamination and the firmness of the fruit. The strawberry selection includes bubble and brush washers. Compare the effect on a sample that reflects the ripeness and type of soil in your batches. If the next operation has a limit on surface moisture, allow time for draining or consider a dewatering conveyor.
Inspection conveyors give operators access to the product surface so they can remove visible defects. Agree on belt width, speed and staffing with the depth of the product layer and the expected reject rate in mind. The catalogue also includes metal detector conveyors. Detection settings depend on the product, packaging and inspection requirements.
Decide where a single machine or an integrated line fits
Consider a single machine when you have identified a specific bottleneck, such as removing leaves, separating grades or dosing berries into containers. Confirm that its operating rate fits both neighbouring operations. For a multi-stage line, plan product transfer, any buffer capacity and access to the areas that need cleaning.
Check the scope of supply when comparing layouts and clarify who handles connections and installation. The catalogue includes a blueberry grading and automatic weighing line and a line for sorting frozen sea buckthorn. Use the examples to identify the modules and product handover points that suit your process.
Use completed projects to discuss your layout
See how INSORTEX approached bilberry sorting in Varash, elderberry processing for Romalin in Drohobych and garden strawberry sorting for Oril Eco. Project photos show the arrangement of equipment and can help you discuss how to organise your own line. When asking about a particular example, point out the modules you are interested in and describe your raw material and the space available.
What determines the cost of a machine or processing line?
The specification depends on the number of operations, feeding and discharge arrangements, number of grades, weighing requirements and integration with existing equipment. A standalone washer can be specified from a sample and a few operating dimensions. A line that combines receiving, sorting and quality control also needs a layout and details on the transfer of fruit between machines.
Compare quotations against the same scope. Confirm which hoppers, discharge chutes, conveyors, interchangeable parts and connections are included. Provide a floor plan with service access and utility points if installation forms part of the project.
Information to prepare for an equipment inquiry
- Berry type, inlet temperature and condition on arrival, including detached berries, berries on branches and frozen blocks.
- Container dimensions, average and peak hourly intake and actual running hours per shift.
- A sample of typical debris and requirements for size grades, intact fruit or portion weight.
- Available floor space, equipment transfer heights and cleaning or changeover requirements.
Match the machine to the operation
| Operation | Catalogue equipment | Details to confirm |
|---|---|---|
| Receive fruit in containers | Container dimensions, transfer height and maximum drop | |
| Remove leaves and light debris | Foreign material, fruit condition and rate of feed | |
| Separate size grades | Size bands, outlets and required proportion of whole fruit | |
| Wash and remove surface water | Soil type, fruit firmness and needs of the next stage | |
| Remove visible defects | Operator access, feed rate and reject discharge | |
| Dose or weigh berries | Target weight, containers and packaging handover |


























