Maximizing the efficiency of production processes

Free consultation: +38(067) 577 13 75

Blueberry sorting equipment

Compare a standalone grader with four size outlets and a three-grade line with automatic weighing. Choose a configuration around the buyer’s diameter specification and your packing process.

Berry processing machinery

Selecting a blueberry grader or weighing line

Turn the buyer’s specification into size grades

Identify which size outlets you need to satisfy the contract. If an order specifies berries of 17 mm and above, decide where the smaller ones will go and whether the largest grade must be collected separately. Check samples from different harvest periods to see whether you need interchangeable grading sizes.

Portion weight and packaging format

The combined line divides blueberries into three size grades and weighs portions to a target. For a separate station filling bags or boxes with frozen blueberries, the catalogue includes a doser with two belt feeds. One fills the container quickly and the other tops it up to weight. When connecting to an existing packer, agree on discharge height and how the receiving machine accepts the portion.

Inspecting fruit and collecting size grades

The four-grade INSORTEX grader has reject outlets and internal collection conveyors. Plan the destination of each size grade. Where operators need to remove visible defects, assign positions on the inspection belt and organise a separate reject collection point.

Choose between a standalone grader and a weighing line

The standalone INSORTEX blueberry grader uses three drums with catalogue grading thresholds of 12, 17 and 21 mm. It produces four size grades and includes an 800 mm inspection belt. If the next step is packing, there is a separate line configuration that sorts into three sizes and weighs portions automatically.

For a standalone grader, describe where each grade is collected and where portions can accumulate. For the integrated line, decide whether a weighed portion goes straight into its container or transfers to another packing machine. Specify how containers are changed and how operators service the weighing station.

Check diameter and portion weight separately

During a trial, measure how consistently berries go to the correct size outlet and how consistently the line achieves the target portion weight. Take samples once the equipment is operating steadily and repeat the check after a batch change. If you use several containers, provide the dimensions, target weight and feeding arrangement for each.

Feeding fresh or frozen blueberries

For fresh blueberries, record the transfer heights and check the condition of the fruit after grading. For frozen batches, check for clumps and allow for the time spent outside the cold area. The belt doser in this selection is specified for filling bags and boxes with frozen berries. Confirm suitability for any other packaging format or fruit condition.

Measurements for a blueberry processing specification

  • A sample size distribution and target diameter limits for each grade.
  • The incoming fruit condition, typical defects and proportion of undersize berries.
  • Portion weights, container dimensions, container changeover rate and peak intake.
  • Transfer heights between modules and the cleaning procedure between batches.

Machines for blueberry grading, inspection and weighing

OperationCatalogue equipmentDetails to confirm
Collect four size gradesThree drums with thresholds at 12, 17 and 21 mm plus a separate route for rejected fruit.
Grade into three sizes and weigh portionsSpecify the grade sizes, target weight and transfer to packaging.
Remove damaged fruit on an existing lineMatch belt width and inspection positions to the reject outlet.
Pack frozen blueberries into bags or boxesTwo belt feeds allow quick filling and topping up to the target weight.

Equipment selection questions

How many size grades can the blueberry grader produce?

The standalone grader is described with four size grades. The integrated grading and automatic weighing line is described with three. Choose the arrangement based on the buyer’s specification and the size ranges that your packing area can handle.

Can we change the grader thresholds?

The catalogue offers interchangeable size grades for the standalone machine. Provide the required diameters and sample measurements to agree the drum settings and outlet arrangement.

When is a standalone grader sufficient?

Consider it when you need to separate by diameter and already have a way to collect and pack the output. Compare the combined line if the next stage needs automatic portion weighing.

How do we integrate the line with an existing packer?

Provide the packer’s inlet height and dimensions, the target weight range and how empty containers enter. Explain whether it takes a continuous feed or whether the grader must allow for pauses between portions.

Discuss your berry processing requirements

Leave your name and phone number. If you have a specification, tell us the berry type, incoming condition, required throughput and the operation you want to carry out.

+38 (067) 577 13 75

Name and phone number are required.